Connecting The Transmitter - Stryker SIDNE 0240020925 Guia Del Usuario

5. Connect the SIDNE wireless microphone receiver to the headset input
on the back of the SIDNE console and ensure the headset transmitter is
on the same frequency as the receiver.
6. Power on the receiver. The receiver will power on only if the SIDNE
console is powered on.
• The LCD screen will read "WAIT. "
• The alert indicator will illuminate red until the transmitter is
powered on.

Connecting the Transmitter

1. Ensure the batteries are installed in the transmitter.
2. Power on the transmitter by holding the power button for three seconds.
3. Select an operating frequency for the transmitter.
Note
• Press the set button on the transmitter two times. "Edit" will show
on the LCD window.
• Press the up or down arrows to select the desired frequency.
• Hold the set button until the LCD shows "Stored. "
• Ensure the microphone is not muted.
• Slide the control cover over the buttons to protect against accidental
button selections.
18
The frequency should match the frequency chosen for the
receiver in order for the headset to communicate properly. For
more information on selecting an operating frequency, consult
the user manual for the 3000 Series Professional UHF Wireless
Systems.