Installing The Expansion Card Risers - Dell EMC PowerEdge XR11 Manual Del Usuario

Figure 63. Removing Riser 2 and 3
Next steps
Replace the expansion card

Installing the expansion card risers

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. If removed, install the expansion cards into the expansion card risers and connect all the riser cables.
NOTE: The procedure to install the expansion card risers is the same for Rear Accessed and Front Accessed configurations.
Steps
1. For Riser 1, hold the blue touch points on the riser and align the connector with the connector on system board.
Figure 64. Installing Riser 1
74 Instalación y extracción de componentes del sistema
riser.
Safety instructions.
Antes de trabajar en el interior de su equipo.