FINAL INSTALLATION
7.
To attach light kit fitter (D) to motor assembly (C),
align holes in switch housing cap, at top of light
kit fitter (D), with holes in switch housing. (Make
sure to align gap on top edge of the switch
housing cap with the reverse switch on switch
housing for the correct fit.) Re-insert switch
housing cap screws (V) previously removed
(Step 5, page 11). Tighten all switch housing cap
screws (V) securely.
8. Install bulbs (L).
IMPORTANT: When you need to replace bulbs,
please allow bulbs and light kit to cool down
before touching the bulbs or the light kit.
7
C
V
D
8
Lowes.com/harborbreeze
12
Switch
Housing
Switch
Housing
Cap
L