Harbor Breeze MAYFIELD BTH44ABZC5C Manual Del Usuario página 9

WIRING
1c. FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES: If you intend to control the fan
and light with separate wall switches, connect
BLACK wire from fan to BLACK wire from the
independent wall switch for the fan. Connect
BLUE wire from fan to the BLACK wire from the
other independent wall switch for the light.
Connect WHITE wire from fan to WHITE wire
from ceiling. Connect all GROUND (GREEN)
wires together from fan (on motor assembly (C)
and mounting bracket (B)) to BARE/GREEN wire
from ceiling.
NOTE: BLACK wire is hot power for fan. BLUE
wire is hot power for light kit. White wire is common
for fan and light kit. BARE/GREEN wire is ground.
Wrap electrical tape (not included) around each
2. 2.
individual wire connector (CC) down to the wire.
WARNING: Make sure no bare wire or wire
strands are visible after making connections. Place
BARE/GREEN and WHITE connections on
opposite side of box from the BLACK and BLUE (if
applicable) connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
Hardware Used
CC
E3 Wire Connector
3. IMPORTANT: Using a full range dimmer switch
(not included) to control fan speed will cause a loud
humming noise from fan. To reduce the risk of fire
or electrical shock, do NOT use a full range
dimmer switch to control fan speed.
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
1c
120 V Power
from ceiling
2
CC
x 4
3
Dimmer
Switch
For illustrative purposes only--not
intended to cover all types of controls
9
BLACK (WALL SWITCH FOR LIGHT)
BLACK (WALL SWITCH)
WHITE WHITE
GROUND/GREEN (BARE)
D/G D/GREEN GREE
WHITE WHITE
WHITE WHITE WHITE WHITE
FROM FAN FROM FAN
BLACK
BLACK BLACK BLACK
BLUE BLUE
BLACK (WALL SWITCH)
Speed
Switch
Lowes.com/harborbreeze
N
CC
CC
3
2
1