Connecting/Disconnecting Hoses - Atlas Copco HYDRAULIC PAC 30 Instrucciones Para El Operario

English

Connecting/disconnecting hoses

!
CAUTION
Ensure that any tools that you are planning
to use are compatible with the model of
power pack you are using.
Connecting hoses
1 Prepare the Machine
a Stop the engine.
b By-pass valve i off position.
2 Inspect the Couplers
Ensure that all couplers are clean and
serviceable.
3 Connect the Hoses
a Attach Return line.
b Attach Feed line. .
4 Check the Hydraulic Oil Level.
a Start the engine and run the machine to
fill up the hydraulic circuit.
b Check the hydraulic oil level.
Disconnecting hoses
1 Prepare the Machine
a Stop the engine.
b By-pass valve i off position.
2 Remove the Hoses
a Release Feed line.
b Release Return line.
Note: The connectors are unlocked by moving
the collar back on the connector.
6
Specification
Static dimensions
Height (A) 740 mm (29")
Width (B) 600 mm (23")
Length (C) 760 mm (30")
Engine types and powerpack weights
Engine Honda GX390
Performance 13 HP (9,6 kW)
Fuel Petrol
Starting Recoil
Powerpack Hydraulic Pac 30
Weight 91 kg
Noice emission
dB(A) rel. 20 mPa
L measured, r = 1m
p
L guaranteed dB(A) rel. 1pW
W
Sound effect according to EN ISO 3744 in accordance with
directive 2000/14/EG.
Fluids, lubricants, capacities and specification
Item Capacity litres (gal)
Engine (oil) Refer to
Manufacturer's
Handbook as
supplied.
Fuel tanks:
Honda GX390 6.5 (1.7)
Hydraulic fluid tanks:
Hydraulic Pac 30 7.0 (1.8)
Flow rates
The European Hydraulic Tool Manufactures
Association (E.H.T.M.A.) has categorised hydraulic
powerpacks and tools in terms of flow rate and
working pressures.
Our Hydraulic Pac 30 is categorised by the
E.H.T.M.A. as below.
Powerpack Hydraulic Pac 30
Flow rate (litres/min.) 0–30
Max. pressure (bar) 138
E.H.T.M.A. cat. D
94 dB
104 dB
Fluid/lubricant
Refer to
Manufacturer's
Handbook as
supplied.
Unleaded petrol
Mobil EAL 224H
or similar