Resetting To Factory Settings; Overview; Possible Uses - Porsche Mobile Charger Plus Manual Del Usuario

Serial number of the charger
The serial number of the charger can be found in the
following places:
– In the letter containing access data after the
designation Serial number
– On the identification plate (on the back of the
control unit) after the abbreviation SN
–
In the Web Application: Settings
nance e Device information

Resetting to factory settings

All your settings will be deleted if you activate this
function. Moreover, all passwords will be reset to the
initial passwords indicated in the letter containing
your access data.
Information
This function is deactivated as standard in the
charger. In order to execute this function in the
charger, it must be enabled in the Web Applikation
e System e Allow reset to factory set-
(Settings
tings).
1. Press and hold the CHARGE STATUS button and
the MULTI-FUNCTION BUTTON simultaneously
for 5 seconds. The CHARGER indicator light
flashes white when you do so.
2. As soon as the CHARGER indicator light stops
flashing, release the MULTI-FUNCTION BUTTON
and keep the CHARGE STATUS button pressed
for 2 seconds.
3. Press and hold the MULTI-FUNCTION BUTTON
again for 5 seconds.
The CHARGER indicator light flashes white when
you do so.
�� The charger is reset to the factory settings.
In the meantime, the indicator lights light up
green.
The device is ready for operation once the
self-test has been completed successfully.
Resetting to factory settings is also possible via the
e Mainte-
web application or at a qualified specialist workshop.
Porsche recommends a Porsche partner as they have
trained workshop personnel and the necessary parts
and tools.
For information on the Web
Application, see the instructions
at https://www.porsche.com/international/about-
porsche/e-performance/help-and-contact/
If you require a different language, please select the
appropriate website for your country.

Overview

Possible uses

The charger can be used in standalone operation and
operated via the buttons. The Powerline-Communi-
cation functionalities of the charger enable connec-
tion to be established to the home network. For this
to happen, the existing mains supply is used to set up
a local network for data transfer. The PLC connection
is a prerequisite for operation via the Web Application
of the charger or control via the energy manager.
Possi- Operating the Porsche Mobile
ble uses Charger Plus
Variant Operation is performed di-
1 rectly at the charger (stand-
alone operation)
Variant Operation is performed via
2 the Web Application of the
charger (without energy man-
ager). A home network (PLC
connection) is required to es-
tablish a connection.
Variant Operation is performed via
3 the Web Application of the
energy manager. The energy
manager is registered as a cli-
ent in the PLC network.
Variant Operation is performed via
4 the Web Application of the
energy manager. The charger
and the energy manager con-
nect directly via the DHCP
server of the energy manager.
Wher
e?
g
p. 52
g
p. 52
g
p. 52
g
p. 53
51