Control Unit - Porsche Mobile Charger Plus Manual Del Usuario

Control unit

Fig. 25 Control unit
A
CHARGE STATUS button with 50 % and 100 %
indicator lights
B
ENERGY MANAGER indicator light
C
DOMESTIC CONNECTION indicator light
D
VEHICLE indicator light
E
CHARGER indicator light
F
MULTI-FUNCTION BUTTON
The CHARGE STATUS button is used to select be-
tween a charging power of 50 % or 100 %, or to
switch to energy manager mode. If an energy man-
ager is available when in energy manager mode, a
connection to the energy manager is established and
its configured charging power is adopted.
54
The following device functions can be set using the
MULTI-FUNCTION BUTTON, partly in combination
with other buttons:
–
Skip reconnection to the energy manager
–
Activate and deactivate ground monitoring
–
Reset to factory settings
–
Reset circuit-breaker error
The and buttons and the – indicator lights
A F B E
indicate the operating state of the control unit and
possible faults through various colours, lights and
flashing.
g Refer to chapter "Malfunctions" on page 72.
g Refer to chapter "Charging current limiting" on
page 67.