Installation Steps - WeatherTech Easy-on Instrucciones De Instalación

Installation Steps

Reach under the hood to the backside of the grill and disconnect the hood lock rod from the grill by releasing the lock mechanism and
3
For 2003-05 models: Remove, (7) nuts securing grill
4
Lower hood and carefully remove the grill from the hood. Set
5
Locate (2) outboard holes on on each end of hoodshield.
7
NOTE: Actual application may vary slightly from illustrations.
gently lifting the rod away from grill.
lock rod
to hood.
grill aside.
mechanism
For 2006-08 models: Remove, (8) nuts securing grill
or
Clean the exposed hood edge, and apply protective
6
Attach fasteners to hoodshield by inserting screw through washer,
then through hood shield, and into well nut. Partially thread screw
Well nut
Hood shield
Washer
8
Page 2 of 3
lock
to hood.
film directly to hood.
into well nut.