Key To Parts (Figure O); Taking The Pump Apart (Figures A To F); Cleaning And Sterilising; Cleaning - NUK JOLIE Manual De Instrucciones

• NUK Breast Milk Containers and teats
are only compatible
associated NUK FIRST CHOICE system.
1 Silicone cushion
2 Breast shield
3 Slot for pump rod
4 Pump lever
5 Handle fixture
6 Pump rod
7 Pump diaphragm
5. Taking the Pump Apart
1. Take the silicone cushion 1 out of the
breast shield 2 (Fig. A).
2. Holding the end of the handle, pull
the pump lever 4 up slightly, until the
handle fixture 5 slips out of the catch
for the handle 8 (Fig. B).
3. Remove the pump lever 4 from the
pump rod 6 (Fig. B).
4. Take the pump diaphragm 7 and
pump rod 6 out of the breast shield 2
(Fig. C).
Hygiene is of the utmost priority
when handling breast milk and
all parts that come into contact
with it. The pump should
therefore only be used in a
clean and sterile condition.
Warning! Clean, sterilise and quickly dry
all parts thoroughly before using for the
first time and immediately after each use.
with
4. Key to Parts

6. Cleaning and Sterilising

• The NUK Breast Milk Container is in
the compliance with EN 14350.
(Figure O)
8 Catch for handle
9 Lip valve
10 NUK Breast Milk Container
11 Stand for NUK Breast Milk Container
12 Sealing disc
13 Screw ring
5. Ease the pump rod 6 out of the pump
diaphragm 7 (Fig. D).
6. Unscrew
Container 10 from the breast shield 2
(Fig. E).
7. Pull the lip valve 9 out of the breast
shield 2 (Fig. F).
8. Finally, clean the individual parts as
described
Sterilising".

6.1 Cleaning

Warning! Do not use cleaning utensils
(such as brushes or scourers) to clean the lip
valve 9. These can cause damage.
1. Clean all parts with warm water and a
little washing up liquid (or NUK
Rinsing Agent).
2. Rinse off all parts in running water.
3. Next,
"6.2 Sterilising").
17
(Figures A to F)
the NUK Breast
in "6. Cleaning
sterilise all
Milk
and
parts (see