Rear Panel DIGISTEEL 250C & 320C
11
12
18
19
Figure 4
Rear Panel DIGISTEEL 380C& 450C
11
12
18
19
20
21
22
Figure 5
11. Wire Liner Entry: Enables installing liner for welding
wire delivered in drum package.
12. Top Chain: To protect gas bottle.
13. Bottom chain: For properly securing the gas cylinder
14. Supply Plug: For gas heater kit (see "Accessories"
chapter).
15. Power Lead (5m): Connect the supply plug to the
existing input cable that is rated for the machine as
indicated in this manual, and conforms to all
applicable standards. This connection shall be
performed by a qualified person only.
16. Gas Connector: Connection for gas line.
17. Gas Flow Regulator Plug: Gas flow regulator can be
purchased separately (see "Accessories" chapter).
English
14
15
16
17
13
14
15
16
17
18. Gas hose
19. Work Lead
20. Cover bracket: To install COOL ARC
supply
and
control
Suggested" chapter).
21. Quick Connect Coupling: Coolant inlet
(supplies cool coolant to the torch/gun).
22. Quick Connect Coupling: Coolant outlet
(takes warm coolant from torch/gun).
Internal Controls
28
25
26
23. Spooled Wire (for GMAW / FCAW): Not supplied as
standard.
24. Wire Spool Holder: Maximum 16kg spools. Holder
allows mounting plastic, steel and fiber spools onto
51 mm spindle.
Note: Plastic Brake Nut has a Left-hand thread.
25. Switch: wire feed / gas purge: This switch allows wire
feeding (wire test) and gas flow (gas test) without
switching on the output voltage..
26. Wire drive: 4-rolls wire drive.
27. Terminal Block of Changing Polarity Plug (for GMAW
/ FCAW-SS process): This terminal block enables to
set the welding polarity (+ ; -), which will be given at
the welding gun
28. USB Receptacle Type A: For USB memory stick
connection. For machine software update and
service purpose, video playing.
29. Fuse F1: Use the low blow fuse:
DIGISTEEL
DIGISTEEL
250C
320C
1A / 400V
1A / 400V
(6,3x32mm)
(6,3x32mm)
11
®
26
cable
(see
"Accessories
23
29
27
24
Figure 6
DIGISTEEL
DIGISTEEL
380C
2A / 400V
2A / 400V
(6,3x32mm)
(6,3x32mm)
power
450C
English