Saf-Fro DIGISTEEL 250C Manual De Instrucciones página 24

Status bar
A B
Figure 11
A - A/B Procedure
B - Information about active welding mode
C - 2/4 - Step
D - USB Memory
E - Access control
F - Cooler
Welding Parameters Bar
The Welding Parameters Bar enables:

Welding process/program change.

Torch trigger function change (GMAW,FCAW),

Add or hide functions and welding parameters – user
setup.

Change the setup.
Table 7 GMAW and FCAW Welding Parameters Bar
Symbol
Select Welding Process
Support
Select Function of Gun Trigger (2-Step /
4-Step)
Pinch
Configuration
User setup
WARNING
Availability of the parameters depend on selected welding
program / welding process.
Table 8 SMAW Welding Parameters Bar
Symbol
Select Welding Process
Support
Arc Force
Hot Start
Configuration
User setup
English
C D E F
Description
Description
Select Welding Program
To select the Welding Program:

Press the button [45] or right knob [44] to get access
of Welding Parameters Bar.

Use the right knob [44] to highlight the icon "Select
Welding Process".

Press the Right knob [44] to confirm the selection.

Use the right knob [44] to highlight the icon "Select
welding Program".

Press the right knob [44] to confirm the selection.

Use the right knob [44] to highlight the program
number.

Press the right knob [44] to confirm the selection.
The lists of available programs depends on the power
source.
20
Figure 12
Figure 13
Figure 14
WARNING
English