Saf-Fro DIGISTEEL 250C Manual De Instrucciones página 29

To save data into USB device:

Connect the USB to welding machine.

Add "USB Memory" icon to the Welding parameters
bar [52].

Use the right knob [44] to highlight the icon "USB
Memory".
Figure 26

Press the right knob [44] to confirm selection – the
USB menu is shown on the display.

Use the right knob [44] to highlight the icon "Save".
Figure 27

Press the right knob [44] to get access of "Save"
option – the save menu is shown on the display.
Figure 28
English

Create or choose a file in which will be saved data
copies.

Display shows the Save Data Menu on USB Memory
Stick.

Use right knob [44] to highlight data icon which will be
saved in the file on USB Memory Stick. For example:
Configuration Menu icon.

Press the right knob [44] to confirm.

To confirm and save the data on USB Memory Stick,
highlight the "Check Mark" icon and then press the
right knob [44].

To exit the "USB Memory" menu – press left button
[45] or disconnect USB Memory Stick from the USB
receptacle.
25
Figure 29
Figure 30
Figure 31
English