Saf-Fro DIGISTEEL 250C Manual De Instrucciones página 34

Lock – it allows to set the password.
To set the password:

Access to „Configuration" menu.

Use the right knob [44] to highlight the "Lock" icon.
Figure 51

Press right knob [44]. The "Lock" setting menu is
shown on the display.
Figure 52

Turn right knob [44] to select: numbers 0-9.

Press right knob [44] to confirm first character of the
password.

Next characters should be selected in the same way.
WARNING
After setting last character system automatically exit.
Select Item to lock – it allows to lock/unlock
some functions on welding parameters bar.
To lock functions:

Access to "Configuration" Menu.

Use right knob [44] to highlight the „Select Item to
lock" icon.
Figure 53
English

Press the right knob [44]. Lock function menu is
shown on the display.

Use the right knob [44] to highlight the function (for
example "Advanced Setup").

Press right knob [44]. The icon of chosen parameter
will disappeared from the lower part of the display
(Figure 55). This parameter disappeared from the
Welding parameters bar as well [52].
To unlock function user have to perform the same steps
as steps to lock function.
30
Figure 54
Figure 55
WARNING
English