Saf-Fro DIGISTEEL 250C Manual De Instrucciones página 42

P.28 Display Workpoint as Amps
Option
P.80 Sense From Studs
English
Determines how workpoint is displayed:

"No" (factory default) = The workpoint is displayed in the format
defined in the weld set.

"Yes" = All workpoint values are displayed as an amperage.
Note: This option may not be available on all machines. The power source
must support this functionality, or this option will not appear in the menu
Use this option for diagnostic purposes only. When power is cycled, this
option is automatically reset to False.

"False" (default) = Voltage sensing is automatically determined by the
selected weld mode and other machine settings.

"True" = Voltage sensing is forced to "studs" of the power source.
38 English