Controls; Ignition Switch; Steering Lock; Handlebar Switches - SWM VAREZ 125 Manual - Uso - Mantenimiento

CONTROLS

IGNITION SWITCH

The ignition switch has three positions:
motorcycle start position
(non-removable key).
key removal position.
steering locking position
(removable key)
Key removal position
•
Turning the key to position, the engine and the
lights go off and you can remove the key from the
ignition switch.
Start position
•
From key removal position, turn the key (1) clockwise
to position. Lights and display come on, and the
motorcycle can be started.
16
EN -

STEERING LOCK

The motorcycle comes with a steering lock located on
the ignition switch (1).
Lock the steering as follows:
Turn the handlebar to the left or to the right.
-
Insert key (2) into the ignition switch (1) to
-
Press the key (2) and turn it anticlockwise to
-
position.
Remove the key (2).
-
To unlock the steering, follow the above procedure in
-
reverse order.

HANDLEBAR SWITCHES

Right-Hand Side
The right-hand switch features the following controls:
1.
Engine start button.
Pressing the button (1) with the key in
position
the switch (2) in
in neutral position or the clutch pulled, starts the
engine.
2.
Engine KILL SWITCH.
Flicked to position, it disables engine starting
-
and running.
Flicked to position, it enables engine starting
-
and running.
position,
position and the gear shift