CHAIN/FRONT SPROCKET/REAR SPROCKET
WEAR CHECK
Check the condition of the chain (1); there may not
-
be any damaged rollers, loosened pins or missing
O-rings.
Check the condition of the front (3) and rear (2)
-
sprocket teeth; if the teeth are as shown in Figure A,
they are in good condition, while if they are as shown
in Figure B, they should be replaced.
34
EN -
Note
If worn out, the front and rear sprockets and the
chain have to be replaced; using a new chain with
worn out front and rear sprockets will rapidly wear
out the chain.
NORMAL
(GOOD CONDITION)
WORN
(REPLACE)