English; Product Description And Intended Use; Warnings And Cautions - Stryker 1688-020-122 Manual Del Usuario

English

4K Coupler, C-Mount, with Advanced Imaging
Modality

Product Description and Intended Use

The Stryker 4K Coupler, C-Mount, with Advanced Imaging Modality (or
"4K Coupler") is used to attach endoscopes to Stryker surgical camera
heads that do not have an integrated coupler. The coupler facilitates
the easy exchange of different-sized endoscopes during a surgical
procedure and allows users to focus the image captured through the
endoscope.
When used in a system with a Stryker light source with Advanced
Imaging Modality (e.g., 0220-220-300, 0220-230-300), the coupler can
visualize the near-infrared light produced by the light source.
the light source user manual for complete system requirements.
1
To verify if the 4K Coupler can visualize near-infrared light produced by other Stryker light
sources, refer to the light source user manual.
Note: the 4K Coupler is not intended for use with the InfraVision™
Illuminator (0220-180-521).
1. Endobody clamp
2. Endobody (endoscope end)
3. Rear adapter (camera end)
4. Focusing ring
Indications
The 4K Coupler is indicated for use in general laparoscopy, general
arthroscopy, nasopharyngoscopy, ear endoscopy, sinuscopy, and
plastic surgery wherever a laparoscope/endoscope/arthroscope/
sinuscope and the Stryker 1688 Video Camera are indicated for use.

Warnings and Cautions

1. Read these instructions thoroughly before using the device.
2. Before using this device, read the 1688 Video Camera user manual
(P38139 English, P38888 multilingual) for warnings, indications,
intended use, and other information about using the camera system.
3. Federal law (USA) restricts this device to use by, or on order of, a
physician.
4. Inspect the coupler for any damage that might have occurred
during shipment or prior use.
1
2
Refer to
1
3
4
EN-1