Service Life; Explanation Of Warning Symbols; General Safety Instructions; Instructions For Use (Qualified Personnel) - Ottobock 8S511-AxonSkinSilicone Instrucciones De Uso

2.2 Area of Application
The product has been developed for use in everyday activities. It must not be used for activities
where it would be exposed to unallowable environmental conditions or strains (e.g. extreme
sports).
2.3 Environmental Conditions
Allowable environmental conditions
Allowable operating temperature: -10 °C to +60 °C (+14 °F to +140 °F)
Allowable storage temperature: -20 °C to +40 °C (-4 °F to +104 °F)
Allowable transport temperature: -20 °C to +60 °C (-4 °F to +140 °F)
Allowable relative humidity: max. 80%
Cleaning agents: warm water and soap
Unallowable environmental conditions
Mechanical vibrations or impacts, touching of sharp-edged or pointed objects
Contact with acids, unallowable cleaning agents, abrasive media (e.g. sand), damp soil, dust, dirt, highly
staining materials (e.g. printing ink, new textiles), solvents (e.g. thinner, acetone, petrol), fire, embers and
unallowable heat (> +60 °C / > +140 °F)

2.4 Service Life

The product is a wear part, which means it is subject to natural wear and tear. The service life
diminishes or increases depending on the individual level of use. Only when the instructions for
use are observed it is possible to achieve the maximal service life, in dependence of the level of
use.
3 Safety

3.1 Explanation of Warning Symbols

Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE

3.2 General Safety Instructions

CAUTION
Using the product without following the instructions for use
Injuries caused by damage to the product or malfunction of the product
► Only use the product by following the instructions for use.
Make the patient aware of all safety instructions marked with "Inform the patient".
►
NOTICE
Unallowable combination of prosthetic components
Product damage due to malfunctions
► Only combine the product with prosthetic components that are approved according to the
section "Combination Possibilities".
► Verify that the prosthetic components may be combined with each other by consulting their
instructions for use.
NOTICE
Non-observance of allowable environmental conditions
Damage to product and soiling due to unallowable environmental conditions
10 | Ottobock