Preparation For Use; Preparations For Donning And Removal - Ottobock 8S511-AxonSkinSilicone Instrucciones De Uso

2
Fig. Item no.
2
2
2
2

5 Preparation for Use

NOTICE
Incorrect donning and removal of the prosthetic glove
Damage to the prosthetic hand and the prosthetic glove due to non-observance of instructions
for use
► Observe all instructions for donning and removal. The prosthetic hand must always be
mounted on the donning tool.
Only use the components listed (equipment, tools, materials) and have them close to hand.
►
► Avoid damage that can be caused to the prosthetic hand and the prosthetic glove, e.g. from
tools and excessive force (in particular on the thumb).
INFORMATION
It is not possible to colour the prosthetic glove with the 635P15=* Colour Pens.

5.1 Preparations for donning and removal

NOTICE
Non-observance of instructions for the donning tool
Damage to the product due to unsuitable donning tool
► Only use the donning tool specified and follow the donning instructions.
12 | Ottobock
Quantity Designation
0 Mounting plate
0 Mounting tool (alignment rod)
0 Donning spray
0 Mounting tool
Tools required:
>
711M64 Mounting Tool, 711M1 Mounting Tool (Alignment Rod)
and either 711M2 Mounting Plate or vice
► Install the mounting tool on the alignment rod.
INFORMATION: The alignment rod must be clamped in a
vice, vertically for donning and horizontally for removal.
Accessories
Reference number
711M2
711M1
640F18
711M64