Bego VarseoSmile Crown plus Instrucciones De Uso página 5

Individualization (optional)
Instead of polishing the surface, the post-cured objects can also be indivi-
dualized with composite stains or veneering materials.
Individualization with composite stain
Commercially available composite stain materials (e. g. VITA ENAMIC
STAIN*, Vita Zahnfabrik and GC OPTIGLAZE Color*, GC) can be used for
individualization of the post-cured VarseoSmile Crown
manufacturer's instructions for use must be observed.
Individualization with veneering materials
Commercially available composite veneering materials (e. g. VITAVM LC*,
Vita Zahnfabrik and VITAVM LC flow*, Vita Zahnfabrik) can be used for in-
dividualization of the restoration. The manufacturer's instructions for use
must be observed.
Veneer shells
Commercially available light-curing veneering composites can be used to
attach the post-cured veneer shells to the metal framework (e. g. VITAVM
LC, VITAVM LC flow, Vita Zahnfabrik). When designing and preparing the
metal framework and processing the veneering material, the instructions
for use of the veneering material manufacturer must be observed.
Basic work steps
• Condition the surface of the metal framework.
• Cover the metal framework with opaquer.
• Sandblast the inside of the veneer shell and clean the veneer shell from
dust.
• Inner surface conditioning of the veneer shell. Observe the information
of the veneering material manufacturer in section "Individualization of
composite frameworks" or "Indivi dualization of artificial teeth".
• Applying the veneering material to the inside of the veneer shell or the
metal framework.
• Positioning of the veneer shell on the metal framework and remove the
excess with a brush or an instrument.
• Carry out the polymerization according to the instructions of the venee-
ring material manufacturer.
• Finally, the surface of the veneer shell should be polished or customized
with composite stains (see section "Polishing" or "Individualization").
8. Cleaning in the dental laboratory and dental practice
Fully cured objects made from VarseoSmile Crown
and disinfected. Steam cleaning (e. g., with Triton SLA) is possible. Dis-
infection in the immersion bath (e. g. ethanol 96 % or MD 520* impres-
sion disinfectant, Dürr Dental Co.) is also possible. Follow manufacturer's
instructions.
9. Luting
Attachment to tooth stump
he finished permanent restorations can be attached using self-adhesive
cements (e. g. RelyX Unicem*, 3M Espe) or composite cement with a primer
(e. g. Variolink Esthetic DC* and Monobond Plus*, Ivoclar Vivadent).
Notice:
• Observe the instructions for use of the luting agent. It is not required to
etch the restoration before attaching.
• Additional exposure to curing lights after attachment will not affect the
properties of the finished object.
10. Disposal
The cured, separated material (base plate, support structure) can no longer
be used. Cured material can be disposed of as domestic waste. Unused
resin or ethanol used for cleaning with resin residues must be disposed of
via the local waste disposal authority or a hazardous waste collection point
stating the safety data sheet.
11. Label symbols
CE mark
Manufacturer
Date of manufacture Consult instructions for use
MD Use-by date
Medical device
Caution
Batch code
+28 °C
Catalogue number Temperature limit
+4 °C
For professional use only
Keep away from sunlight
Rx ONLY
* This symbol is a commercial designation / registered trademark of a
company that is not part of the BEGO company group.
restoration. The
plus
can be easily cleaned
plus
BEGO Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG
Wilhelm-Herbst-Str. 1 · 28359 Bremen, Germany
Tel. +49 421 20 28-0 · Fax +49 421 20 28-100
Manufacturer
E-Mail: info@bego.com · www.bego.com
Изготовитель
5