Hardware Contents; Preparation - Harbor Breeze TILGHMAN Manual Del Usuario

HARDWARE CONTENTS (shown actual size)
AA BB
Blade
Screw
Wire
Connector
Qty. 15
+ 1 extra
Qty. 4

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Stepladder and Wire Strippers
Helpful Tools (not included):
Wire Cutters
DANGER: When using an existing outlet box, make sure the outlet box is securely attached to
the building structure and can support the full weight of the fan. Failure to do this can result in serious
injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan
after installation is complete.
CAUTION: Be sure outlet box is properly grounded and that a ground wire (green or bare) is
present.
After opening top of carton, remove mounting hardware package from foam inserts. Remove motor
from packing and place on carpet or on foam to avoid damage to finish.
CAUTION: Carefully check all screws, bolts and nuts on fan motor assembly to ensure they are
secured.
All manuals and user guides at all-guides.com
DD
CC
Lock
Screw
Washer
Qty. 3
Qty. 3
AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and
Lowes.com/harborbreeze
5