Harbor Breeze 40075 Manual De Instrucciones página 17

FINAL INSTALLATION
3. Insert a blade (G) through the slot on the band on
the motor housing (E). Align the holes and attach a
blade (G) to the motor housing (E) with blade screws
(AA) and fiber blade washers (BB). Tighten each
blade screw (AA) starting with the one in the middle.
Repeat this step for the remaining blades (G).
Time Saver: Fiber blade washers (BB) can be set on
each blade screw (AA) prior to installing the blades
(G).
Hardware Used
AA
Blade Screw
Fiber Blade
BB
Washer
4. Remove the three switch housing screws (GG) from
the fitter plate portion of the motor housing (E). Connect
the 9-wire plug from the motor housing (E) to the 9-wire
plug from the switch housing (F), matching up the
colors on the plugs for the correct fit. Make sure the
plugs connect tightly.
Hardware Used
Switch Housing
GG
Screw
3
E
x 15
x 15
4
GG
x 3
F
17
Lowes.com/harborbreeze
AA G
BB
E
Printed in China