OPERATING INSTRUCTIONS
1. The pull chain labeled FAN has four positions to
control fan speed. One pull is HIGH, two is MEDIUM,
three is LOW and four turns the fan OFF.
2. The pull chain labeled LIGHT is used to turn the light
ON or OFF.
3. Use the fan reverse switch, located on the switch
housing (F) inside the glass shade (M), to optimize
your fan for seasonal performance. A ceiling fan will
allow you to raise your thermostat setting in summer
and lower your thermostat setting in winter without
feeling a difference in your comfort.
Notet
Wait for the fan to stop before moving the re-
verse switch.
*In order to access the reverse switch, you must first
remove the pull chain extensions (KK), finial (K),
finial plate (L) and then, carefully, the glass shade
(M). After setting the reverse switch in the desired
position, see Steps 11 and 12 in the previous section
to re-attach all parts that were just removed.
1
2
3
F
M
22
Lowes.com/harborbreeze
L
K
KK