Luminance Brands Kathy Ireland Home CF244LGRT00 El Manual Del Propietario página 15

6.4
Remove one of the three M4 x 10 mm Pan Head
Screws in the Lower Housing and loosen the remaining
two screws .
Retain the M4 x 10 mm Pan Head Screw for future use .
Tuck wires into the LED Light Fixture Assembly and
position in the Lower Housing Assembly .
Position the LED Light Fixture Assembly into the Fan
Housing by placing the cut out notches over the Fan
Housing Dimples (Figure 25) .
NOTE: Make sure wires and terminals are
positioned under the LED Light Fixture Assembly
and not pinched between LED Light Fixture
Assembly and Lower Housing.
FAN MOTOR ASSEMBLY
WHITE WIRE
FAN MOTOR ASSEMBLY
BLUE WIRE
LED LIGHT FIXTURE
ASSEMBLY BLACK WIRE
LED LIGHT FIXTURE
ASSEMBLY WHITE WIRE
LED LIGHT FIXTURE
ASSEMBLY
Figure 24
LOWER
HOUSING
KEY HOLE
SLOT (2)
DIMPLES
CUT OUT
NOTCHES
LED LIGHT
FIXTURE
ASSEMBLY
Figure 25
Please contact 1-800-777-4440 for further assistance
15
M4 x 10 mm PAN
HEAD SCREW
luminancebrands.com
U.L. Model No.: CF244L & CF252L