Luminance Brands Kathy Ireland Home CF244LGRT00 El Manual Del Propietario página 16

6.5
Rotate the LED Light Fixture Assembly clockwise on
the Lower Housing by engaging the two loosened
screws onto the key hole slots (Figure 26) .
Secure the LED Light Fixture Assembly by tightening
the two M4 x 10 mm Pan Head Screws .
Reinstall the M4 x 10 mm Pan Head Screw that was
previously removed .
A spare M4 x 10 mm Pan Head Screw supplied in parts
bag, if needed .
6.6
Place the Glass into the opening in the Lower Housing,
aligning the three Flat Areas on the top edge of the
Glass with the three raised Dimples on the Lower
Housing and turn the Glass clockwise until it stops
(Figure 27) .
NOTE: Periodically check that the Glass is seated
fully clockwise in the Lower Housing.
Please call Customer Service at 1-800-777-4440
if you have any questions about installation and
operation of this Ceiling Fan .
LOWER
HOUSING
LED LIGHT FIXTURE
ASSEMBLY
M4 x 10 mm PAN HEAD SCREW
Figure 26
DIMPLES (3)
LOWER HOUSING
FLAT AREA (3)
Figure 27
16
LED LIGHT
FIXTURE
ASSEMBLY
GLASS
U.L. Model No.: CF244L & CF252L