Troubleshooting - Luminance Brands Kathy Ireland Home CF244LGRT00 El Manual Del Propietario

FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE
TROUBLESHOOTING YOUR FAN.
TROUBLE
1. Fan will not start. 1. Fuse or circuit breaker blown.
2. Loose power line connections to the fan.
3. Fan/Light remote control is OFF.
1. Blades not attached to fan.
2. Fan sounds
noisy.
2. Screws securing fan blades to motor are loose.
1. Screws securing fan blades to motor are loose.
3. Fan wobbles
excessively.
2. Fan blades are not seated properly.
3. Fan blades out of balance.
4. Light fixture will 1. Loose electrical connectors.
not illuminate.
2. Remote control battery is weak.

11. Troubleshooting

WARNING
!
PROBABLE CAUSE
23
SUGGESTED REMEDY
1. Check main and branch circuit fuses or circuit breakers.
WARNING
!
Make sure main power is turned OFF.
2. Check line power connections to fan.
3. Turn ON Fan/Light remote control.
1. Attach blades to fan before operating.
2. Check to make sure the screws which attach the blades to
the motor are tight.
WARNING
!
Make sure main power is turned OFF.
1. Check to be sure screws which attach the fan blade to the
motor are tight.
2. Check to be sure that the screws securing the fan
blades seat firmly.
3. Interchanging an adjacent (side by-side) blade pair can
redistribute the weight and result in smoother operation.
Or use supplied balancing kit to balance blades.
1. Shut off the branch circuit electricity at the fuse box or
breaker panel and check the receiver electrical connectors
for proper installation.
2. Replace the AAA remote batteries.
Please contact 1-800-777-4440 for further assistance
luminancebrands.com
U.L. Model No.: CF244L & CF252L