User Instructions; Control Panel - TRAPEZA 7NU0408DG52 Manual Uso Y Mantenimiento

7. USER INSTRUCTIONS

7.1. CONTROL PANEL

Description of control panel
ELECTRONIC CONTROL BOARD 'ON'
START/STOP BLAST CHILL CYCLE
UP
increases, during blast chilling/shock freezing displays
for a few seconds the time elapsed from start of cycle.
DOWN
decreases, during blast chilling/shock freezing
displays for a few seconds the time elapsed from start of cycle.
+3°C SOFT BLAST CHILL
–18°C SOFT SHOCK FREEZE
HARD BLAST CHILL +3°C
HARD SHOCK FREEZE -18°C
PROGRAMME
selection and memorising
HACCP ALARM RECALL
reports date, duration, type, temperature, max. range
STERILISATION
PIN PROBE HEATING
for pin probe extraction in shock freezing programmes
MULTI-POINT PIN PROBE SENSOR
DISPLAY
DEFROST
Start/stop defrosting, evaporator probe temperature
Description of the display and symbols.
DISPLAY 1
DISPLAY 2
DISPLAY 1
Displays pin probe temperature or time.
DISPLAY 2
Displays temperature of the cabinet.
DISPLAY 3
Displays the operational phase in progress (1-3)/No. of
pin probe inserted in core.
Cabinet temperature .
Heating active pin probe.
Blast chill/shock freeze cycle with pin probe.
Blast chill/shock freeze cycle with timer.
Sterilisation in progress.
Blast chill cycle function selected (+3ºC).
Shock freeze cycle function selected (-18ºC).
Hard phase selected.
Blast chill in progress (fl ashing active compressor
delay).
Conservation phase in progress.
Machine in Stop mode.
HACCP alarm.
HACCP HACCP
21 - GB
DISPLAY 3