Conservation Phase; Memorising A Blast Chill/Shock Freeze Programme - TRAPEZA 7NU0408DG52 Manual Uso Y Mantenimiento

GB - 26
d- set duration phase 1/2/3
With a further pressing the
value increases or decreases.
Repeat the same procedure described for the later phases 2 and 3.
Phase 4 of conservation only involves setting the set temperature. To confi rm the settings of all the
phases described, press the relevant key
Press the
At the end of the cycle the machine moves into conservation phase automatically, see ch. 7.3.5.
By pressing the
The new sets of the personalised cycle will be lost when the machine is stopped with key
IN ORDER TO MODIFY THE DATA IN PERMANENT WAY (see tecincal manual)
SET CABINET
SET FAN SPEED
SET CORE
SET TIME

7.3.5. CONSERVATION PHASE

The machine proceeds to conservation phase when the last pin probe has reached core temperature
at the end of the cycle. DISPLAY 2 indicates the cabinet temperature (Fig.11).
The conservation symbol
(Fig.11)
the beginning of the conservation phase. This phase is terminated by pressing the
The machine sets itself on Stand-by and the user is asked whether the programme is to be memo-
rised or the button must be pressed once more. Press the pin probe heating button
extraction of the probe from the product (after shock freezing).
The
Pin probe heating takes place only if the temperature of the probe is less than -5ºC

7.3.6. MEMORISING A BLAST CHILL/SHOCK FREEZE PROGRAMME.

Press the
of the fi rst free programme. When the
trol positions itself to re-start with a new cycle (Fig.12).
It is possible to cancel a memorised programme by overwriting it with a new blast chill/shock freeze
(Fig.12)
cycle as follows: instead of memorising a completed cycle on the fi rst free programme automatically
selected by the system, pressing the
cancelled and press the programme button
If symbols
memorised programmes.
(Fig.13)
the clock
button to start the cycle.
displays the duration of the cycle just fi nished, and it can be stored as described at ch. 7.3.6.
PHASE 1
S01
S50
S02
S03
light up. By pressing the
symbol lights up on the display.
button when the machine is in conservation mode. DISPLAY 1 indicates the number
appear on DISPLAY 2 (Fig.13) next to the number, it means that there are no
symbol fl ashes, rotating the knob the set time
/ /
BLAST CHILL OR SHOCK FREEZE
PHASE 2
S04
S51
S05
S06
, button is pressed, the cycle is memorised and the con-
or position it on the number of the programme to be
.
(+3) / (-18) for extended time.
CONSERVATION
PHASE 3 PHASE 4
S07
S52
S08
S09
to view the time elapsed from
.
.
S10
S53
- -
- -
, button.
to facilitate