Kichler Lydra 52 Manual De Instrucciones página 15

INSTALLING THE LIGHT KIT AND GLASS
Step 5. Attach the light case to the light kit, align with three (3) round holes,
tighten with three (3) screws by using the included L shape of screwdriver.
(Fig. 24)
Step 6. Screw the finial into the threaded rod of light kit. (Fig. 25)
CAUTION: Do not over tighten finial as this could crack or break glass.
Screw
Light Case
L Shape of Screwdriver
Fig. 24
Thread Rod
Finial
Fig. 25
52" Lydra LED | 15