Operating Mode "Backend-System - Mennekes AMTRON Serie Manual De Instrucciones

Teach RFID cards by entering RFID UIDs
To do this, the UIDs of the RFID cards must be known.
f Navigate to the "Operator" menu and set the following
parameters:
Parameter Setting
Local fixed f Select "On".
authorization
list (FLL)
FLL learning f Select "Off".
mode
List of entries f Enter RFID-UIDs.
in FLL „ Syntax: UID1:UID2:UID3 ...
„ Max. 80 RFID UIDs are displayed
f When the configuration is concluded, click the "Save &
Restart" button.
Delete RFID cards
f Delete all entries of the parameter "List of entries in
FLL".
f Click the "Save & Restart" button.
f Teach authorized RFID cards.
f Click the "Save & Restart" button.

6.2.3 Operating mode "Backend-System"

The device can be connected via wireless communication
or ethernet to a Backend-System. The device is operated
via the Backend-System.
A connection to a Backend-System via USB or
WLAN is not possible.
A micro SIM card is required for connecting via
wireless communication.
f Insert the SIM card.
Î "6.3 Inserting the SIM card"
An internet connection via the local network is
required for the connection via Ethernet. This
type of connection only works in combination
with OCPP-J 1.6.
20
f Navigate to the "Settings" menu and set the following
parameters:
Parameters Settings / description
Connection Type f Select "GSM" or "Ethernet".
Free charging f Select "Off".
Access Point Name Name of the access point of your
(APN) mobile access
APN Username User name for the access point
of your mobile access
APN password Password for the access point of
your mobile access
OCPP Mode Selection of the OCPP communi-
cation protocol
If "OCPP Mode" = "OCPP-S 1.5" or "OCPP-S 1.6":
SOAP OCPP URL of URL address of the Backend-
backend (standard System
OCPP)
If "OCPP Mode" = "OCPP-J 1.6":
WebSocket JSON WS / WSS-URL of the OCPP
OCPP URL of Backend-Systems
Backend
HTTP Basic „ Only if "Connection type" =
Authentication pass-
word „ An empty field prevents the
If "OCPP Mode" = "OCPP-B 1.5" or "OCPP-B 1.6":
Not relevant for the device
Hostname (Binary Not relevant for the device.
OCPP)
Portnumber (Binary Not relevant for the device.
OCPP)
„ Information concerning APN is provided by
your mobile network operator
„ Information concerning OCPP and the pass-
word for HTTP Basic Authentication are provi-
ded by your Backend-System operator.
f Click the "Save" button.
f If necessary, make the appropriate advanced settings
in the "Operator" menu, e.g. enter the PIN of the SIM
card.
f When the configuration is concluded, click the "Save &
Restart" button.
"Ethernet"
HTTP Basic Authentication