Mennekes AMTRON Serie Manual De Instrucciones página 70

Block 11: Energy meter
Parameter
Reset Meter Value Behaviour (S0
and internal meter)
Send signed meter values
The format of signed meter
values
Send the meter's public key to
HTB backend
Data transfer for Tariff And Total
Usage
Meter values sampled data
(OCPP)
Meter Value Sample Interval
(OCPP)
Meter values aligned data (OCPP) List of parameters sent by the ener-
Clock aligned data interval
(OCPP)
Meter configuration (Second)
IP address of second meter
Port number of Second Meter
Pulses per kWh (Second S0
meter)
28
Description
Reset of the energy meter at each
charging process
Setting that specifies whether infor-
mation concerning the tariff and
energy consumption should be dis-
played
List of parameters sent by the ener-
gy meter during a charging process
via OCPP
Interval (in seconds) for the trans-
mission of values for "Meter values
sampled data (OCPP)"
gy meter via OCPP, independent of
the charging process
Interval (in seconds) for the trans-
mission of values for "Meter values
aligned data (OCPP)"
External energy meter selection for
additional consumers
IP address of the external energy
meter
Port number of the external energy
meter
Necessary
for ...
Backend-
System
Not relevant for the device
Not relevant for the device
Not relevant for the device
Backend-
System
Charging sys-
tem
Not relevant for the device
Remark
Information will be provided
by your Backend-System
provider
Only if "External Meter
Support" = "On"
Preset: "502"