Mennekes AMTRON Serie Manual De Instrucciones página 64

SIMcard PIN Number
Network selection mode
Modem Access Technology
Scan network operators at boot Setting that specifies whether the available
Requested Network operator
Network operator name format
WAN router
Block 3: Networking via Ethernet
Parameter
Mode for ethernet configu-
ration
DHCP client hostname
DHCP client request retries
DHCP client request timeout
DHCP client request delay
Static network configuration
IP
Static network configuration
netmask
Static network configuration
gateway
Static network configuration
DNS
Block 4: Networking via WLAN - Networking multiple devices via WLAN is not possible.
Parameter
WLAN SSID
WLAN password
Mode for WLAN configuration
DHCP client hostname
DHCP client request retries
DHCP client request timeout
22
PIN for unlocking the SIM card
Automatic or manual selection of the mobi-
le network provider
Selection of the mobile telephony standard
mobile network providers will be displayed
Name of the network provider that should
be used in manual mode
Setting that specifies whether the format of
the name of the network provider is alpha-
numeric or numeric
Access from ethernet interface
to WAN interface (GSM)
Description
Mode for network configuration of charging
point
Host name that is sent to the DHCP server
together with DHCP requests
Number of DHCP client request retries
DHCP client request timeout (in seconds)
Wait time between DHCP client requests (in
seconds)
IP address for static IP address configuration
Network screen for static IP address configu-
ration
Gateway address for static IP address confi-
guration
DNS server for static IP address configuration
Description
Only if the SIM card is
locked with a PIN
Preset: "AUTO"
Preset: "AUTO"
Wireless
Preset: "Off"
communica-
tion
Only relevant if
"Network selection
mode" = "Manual"
Network
Necessary Remark
for ...
Preset: "Auto (DHCP)"
Preset: "10"
Preset: "10"
Preset: "10"
Network
„ Only relevant if
„ The specifics for the
Necessary for ... Remark
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
Not relevant for the device
"Mode for ethern-
et configuration" =
"Manual config"
static IP address need
to be selected accor-
ding to your router or
switch.