Circuplodes; Operation - Enraf Nonius Curapuls 670 Instrucciones De Manejo

Three different types of electrodes are available for
the Curapuls 670.
With the Circuplode diam. 140 mm a high in-depth
radiation in small regions can be achieved. It is the
most universal and therefore the most used emitter.
The Circuplode diam. 90 mm is perfectly suited for
treatment of small joints (e.g. the wrist joint) and in
children's physiotherapy.
The Circuplode-E (ellipse-shaped Circuplode) is
especially for for treatment of larger parts of the body,
such as the hipjoint and large oblong muscles.
The Circuplode-E can generate a frequency of 800
Hz. Ideal for thermal treatment.
With most pre-programmed treatment protocols an
advice is given regarding the best suited Circuplode
for the selected pathology.
With these electrodes a towel should be placed be-
tween the skin and the electrode, after clearing the
area to be treated.
22
All manuals and user guides at all-guides.com

CIRCUPLODES

In the Curapuls 670, pulse duration, pulse frequency,
power and treatment duration are adjustable. When
two electrodes are used, the selected pulse frequency
and treatment duration apply to both electrodes,
while the other parameters can be set separately for
each electrode.
Connect the necessary electrodes and switch the
equipment on by means of the on/of switch. After
switching on and performing the self test of the
Curapuls 670, the information screen appears stat-
ing the software and language version.
After a few seconds the main menu appears with the
following possibilities:
• Set parameters
• Treatment memory
• Treatment protocols
System settings
If you are in the main menu, you can set the stand-
ard settings of the Curapuls. To do so, keep the "ar-
row left" key pressed for 2 seconds. The sub screen
appears with the following possibilties:
Language
By turning the central control you can choose the
desired language.
By pressing the "arrow down" key, you go to the
next option.
Contrast
By turning the central control you can choose the
desired contrast.
Sound
You can choose between "on" and "off" by turning
the central control. If you choose "on", you will be
hearing a beep tone every time you press an "arrow"
key, the Enter key or the Start key.
Mode
Here you can choose between a conventional screen
and a screen only indicating the mean power.
Screen
You can choose between "normal", i.e. dark letters
on a light background or "inverse" (light letters on a
dark background).
After you have set your preferences, use the "arrow
down" key to return to the main menu. Press the
Enter key.

OPERATION