Safety Precautions - Cebora 366 Manual De Instrucciones

CEBORA S.p.A.
IMPORTANT: BEFORE STARTING THE
EQUIPMENT, READ THE CONTENTS OF
THIS MANUAL, WHICH MUST BE STORED
IN A PLACE FAMILIAR TO ALL USERS FOR
THE ENTIRE OPERATIVE LIFE-SPAN OF
THE MACHINE. THIS EQUIPMENT MUST
BE USED
OPERATIONS.
1

SAFETY PRECAUTIONS.

WELDING AND ARC CUTTING CAN BE
The user must therefore be educated against the
hazards, summarized below, deriving from
welding operations.
information, order the manual code 3.300.758.
GB
NOISE.
This machine does not directly produce
noise exceeding 80dB. The plasma
cutting/welding procedure may produce
noise levels beyond said limit; users must
therefore implement all precautions required by
law.
ELECTRIC AND MAGNETIC FIELDS.
May be dangerous.
Electric current following through
any conductor causes localized
Electric
(EMF).
Welding/cutting current creates EMF fields
around cables and power sources.
The magnetic fields created by high currents may
affect the operation of pacemakers. Wearers of
vital electronic equipment (pacemakers) shall
consult their physician before beginning any arc
welding, cutting, gouging or spot welding
operations.
Exposure to EMF fields in welding/cutting may
have other health effects which are now not
known.
All operators
procedures in order to minimize exposure to
EMF fields from the welding/cutting circuit:
- Route the electrode and work cables together
– Secure them with tape when possible.
- Never coil the electrode/torch lead around
your body.
3300279-C
SOLELY FOR WELDING
HARMFUL
YOURSELF
OTHERS.
For more detailed
and Magnetic
should use the following
- Do not place your body between the
electrode/torch lead and work cables. If the
electrode/torch lead cable is on your right
side, the work cable should also be on your
right side.
- Connect the work cable to the workpiece as
close as possible to the area being welded/cut.
- Do not work next to welding/cutting power
source.
EXPLOSIONS.
TO Do not weld in the vicinity of
AND containers under pressure, or in the
presence of explosive dust, gases or
fumes.
All cylinders and pressure regulators used in
welding operations should be handled with care.
ELECTROMAGNETIC COMPATIBILITY.
This machine is manufactured in compliance
with the instructions contained in the harmonized
standard IEC 60974-10 (CL.A), and must be
used solely for professional purposes in an
industrial
potential
electromagnetic
industrial environments.
DISPOSAL
ELECTRONIC EQUIPMENT.
Do not dispose of electrical equipment
Fields together with normal waste!
In observance of European Directive
2002/96/EC on Waste Electrical and
Electronic Equipment and its implementation in
accordance
equipment that has reached the end of its life
must be collected separately and returned to an
environmentally compatible recycling facility. As
the owner of the equipment, you should get
information on approved collection systems from
our local representative. By applying this
European Directive you will improve the
environment and human health!
IN CASE OF MALFUNCTIONS, REQUEST
ASSISTANCE
PERSONNEL
environment. There
difficulties in
compatibility
OF ELECTRICAL
with national law,
FROM QUALIFIED
17-03-2016
24
may be
ensuring
in non-
AND
electrical