Operation; Pre-Ride Inspection - Honda CBX250 TWISTER Manual Del Propietário

36

OPERATION

Pre-ride Inspection

For your safety, it is very important to take a few
moments before each ride to walk around your
motorcycle and check its condition. If you detect any
problem, be sure you take care of it, or have it
corrected by your Honda dealer.
WARNING
!
Improperly maintaining this motorcycle or failing to
correct a problem before riding can cause a crash in
which you can be seriously hurt or killed.
Always perform a pre-ride inspection before every
ride and correct any problems.
1. Engine oil level – add engine oil if required
(page 27). Check for leaks.
2. Fuel level – fill fuel tank when necessary (page 25).
Check for leaks.
3. Brakes – check operation;
front : make sure there is no brake fluid leakage
(page 22).
rear: adjust free play if necessary (page 23).
4. Tyres – check condition and pressure (pages 28
and 29).
5. Drive chain – check condition and slack (page 53).
Adjust and lubricate if necessary.
6. Throttle – check for smooth opening and full
closing in all steering positions.
7. Lights and horn – check the headlight, taillight,
brake light, turn signals, indicators and horn for
proper operation.
8. Engine stop switch – check for proper function
(page 32).
9. Side stand ignition cut-off system – check for
proper function (page 58).
.
Owner´s Manual