Brake Light Switch Adjustment - Honda CBX250 TWISTER Manual Del Propietário

64
Main Fuse
The main fuse (1) is located behind the left side cover.
The specified fuse is: 20A
1. Remove the seat (page 34).
2. Remove the left side cover (page 35).
3. Disconnect the wire connector (2) of the starter
magnetic switch (3).
4. Pull out the old fuse and install a spare main fuse
(4).
The spare main fuse is located under the starter
magnetic switch.
5. Reconnect the wire connector and install the left
side cover.
6. Install the seat.
(2)
(4) (3)
(1) Main fuse
(2) Wire connector
(3) Starter magnetic switch
(1)
(4) Spare main fuse

Brake Light Switch Adjustment

(Refer to the Safety Precautions on page 43.)
Check the operation of the brake light switch (1) at the
right side behind the engine from time to time.
Adjustment is done by turning the adjusting nut (2).
Turn the nut in the direction (A) if the switch operates
too late and in direction (B) if the switch operates too
soon.
(1)
(A)
(B)
(2)
Owner´s Manual
(1) Brake light switch
(2) Adjusting nut