Honda CBX250 TWISTER Manual Del Propietário página 96

Owner´s Manual
Rear Brake
Pedal Height Adjustment
Place the motorcycle on its side stand.
The stopper bolt (1) is provided to allow adjustment of
the pedal height. To adjust the pedal height, loosen the
lock nut (2) and turn the stopper bolt. Tighten the lock
nut.
(3)
(2)
(1)
Brake Adjustment
1. Place the motorcycle on its side stand.
2. Measure the distance the rear brake pedal (3)
moves before the brake starts to take hold.
Free play should be:
20 – 30 mm (0.8 – 1.2 in)
If adjustment is necessary, turn the rear brake
adjusting nut (4).
(1) Stopper bolt
(2) Lock nut
(3) Rear brake pedal
(A)
(B)
3. Apply the brake several times and check for free
wheel rotation after the brake lever is released.
• Make sure the cut-out on the adjusting nut is seated
on the brake arm pin (5) after making final free play
adjustment.
• If proper adjustment cannot be obtained by this
method, see your Honda dealer.
Other Checks
Make sure the brake rod, brake arm, spring and
fasteners are in good condition.
(4) Rear brake adjusting
nut
(A) Decrease free play
(B) Increase free play
(4)
(5) Brake arm pin
(5)
23