Harbor Breeze WAVEPORT Manual Del Usuario página 15

FINAL INSTALLATION
7.
Install bulbs (Q).
CAUTION: When replacing bulb(s), allow
bulb(s) and glass shade to cool down before
touching.
Thread preassembled fan and light pull chains
8.
through corresponding pull chain guides on the outer
rim of the light kit fitter (F).
Remove three light kit fitter screws (S) from light kit
fitter (F). Lift glass shade (I) up to light kit fitter (F),
securing with light kit fitter screws (S).
CAUTION: Do NOT use screwdriver or power
tools to tighten light kit fitter screws (S). Glass
WILL break. HAND TIGHTEN ONLY.
Note: Do NOT remove the rubber ring on lip of glass
shade (I) as this along with the light kit fitter screws
(S) will help hold the glass shade (I) in place.
9. Attach pull chain extensions (DD) or custom pull
chain extensions (not included) to corresponding
pull chains labeled with "LIGHT" and "FAN".
Hardware Used
Pull Chain
DD
Extension
All manuals and user guides at all-guides.com
x 2
15
7
Q
8
F
S
I
9
DD
Lowes.com/harborbreeze
Q
Pull
Chain
Guide
Rubber
Ring