Installing Fan Without Light Kit - Harbor Breeze WAVEPORT Manual Del Usuario

INSTALLING FAN WITHOUT LIGHT KIT

1. If you do NOT wish to use the light kit, remove
the three preassembled switch housing screws (U)
from preassembled switch housing plate on motor
housing (D). Connect male plug from motor housing
(D) to female plug from switch housing (T), matching
up the colors on the male plug with the colors on the
female plug for correct fit. Make sure plugs are
connected completely. Align holes in switch housing
(T) with holes in switch housing plate. Re-insert
switch housing plate screws (U) just removed and
use a Phillips screwdriver to secure switch housing
(T) to switch housing plate. Tighten all screws
securely.
Attach necessary pull chain extension (DD) or
2.
custom pull chain extension (not included) to
corresponding pull chain labeled FAN.
Hardware Used
DD
Pull Chain
Extension
All manuals and user guides at all-guides.com
x 1
16
1
Male
Switch
Plug
Housing
Plate
Female
Plug
U
2
DD
Lowes.com/harborbreeze
D
U
T
D