Changing Settings - Blackmagic Design HyperDeck Shuttle HD Manual De Instalación Y Funcionamiento

Changing Settings

Pressing the 'menu' button will open the settings menu, which will appear as a video overlay
on the bottom left corner of your connected HDMI display.
MENU SET
Press the menu button to open the settings menu
JOG SCR
Use the search dial to navigate to the submenu or setting
MENU SET
JOG SCR
Press the 'set' button to select the submenu or setting
Adjust settings using the search dial or the forward and backward skip buttons. Confirm the
selection by pressing the 'set' button.
To leave the menu, press 'menu' to step back through the options and return to the
home screen.
TIP You can position the menu to any of the four corners of your display using the
setup menu. We recommend turning the menu off when you have finished changing
settings to make sure the HDMI output is a clean feed when connected to an HDMI
switcher, such as ATEM Mini Extreme.
MENU SET
DISK
DISK SD
JOG SCR
CLIP
DISK SD
CLIP
SD
CLIP
Changing Settings 11