Menu Settings - Blackmagic Design HyperDeck Shuttle HD Manual De Instalación Y Funcionamiento

even if there are other files on the disk that match the default video standard. It's assumed you
want to playback the same video standard as you just recorded. If you unplug the media disk
and plug it back in again, only then will the default video standard be used to choose which
type of files to play back.
The default video standard is only a guide to help the HyperDeck Shuttle HD make decisions
about what to do when it's not sure. It's not an override that forces the deck to behave in any
specific way.
Max Shuttle Speed
The maximum shuttle speed on HyperDeck Shuttle HD is x50 speed. If you want to reduce this
speed, you can select from one of the other speed presets.

Menu Settings

Using the menu settings you can adjust the location and appearance of the menu on the
connected HDMI display.
Appearance
Set your HyperDeck's onscreen menu to dark or light mode. Light mode will offer more contrast
when media is dark, or when you are in teleprompter mode.
Opacity
Adjust the levels to reduce the opacity of the menu overlay on the connected display from the
default 100% to 20%.
Position
The menu overlay will default to the bottom left hand corner of the screen. To move the menu to
a different location, select 'position' and press the 'set' button. Now you can select the top left,
top right, bottom left or bottom right corner of the screen.
Settings 17