Network Settings - Blackmagic Design HyperDeck Shuttle HD Manual De Instalación Y Funcionamiento

Network Settings

Protocol
Blackmagic HyperDeck is shipped set to DHCP, so once connected, your network server will
automatically assign an IP address and no other network settings will need to be adjusted. If
you need to set a manual address, you can connect via a static IP.
With 'protocol' selected press the 'set' button to access the menu, scroll to 'Static IP' and
press 'set'.
IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS
Once Static IP is selected, you can enter your network details manually.
To change the IP address:
1 Use the search dial to highlight 'IP address' and press the 'set' button on your
HyperDeck's control panel.
2 Using the search dial, adjust the IP address, rotate the search dial to adjust your IP
address, pressing 'set' to confirm before adjusting the next set of values.
3 Press 'set' to confirm the change and move to the next value.
When you have finished entering your IP address, you can repeat these steps to adjust the
Subnet Mask and Gateway. Once finished, press the 'menu' button to exit and return to the
home screen.
Timecode Settings
Set your timecode input and output options, including choosing between recording the source
timecode, time of day timecode or setting your timecode manually.
Settings 18