Recording Video - Blackmagic Design HyperDeck Shuttle HD Manual De Instalación Y Funcionamiento

2 Your HyperDeck will verify the SD card. This is shown by an illuminated green SD
indicator on the top of the HyperDeck Shuttle HD. Once verified, the indicator
will turn off.
DISK SD
That's all there is to getting started and your HyperDeck Shuttle HD is now ready for recording
and playback!
Keep reading this manual for detailed information about how to record and play back clips,
change settings, and much more.

Recording Video

After confirming that your video source is displayed on the HDMI destination equipment, you
can start recording straight away!
To start recording, press the record button. When recording to an SD card, the SD indicator
will illuminate red and the record and play buttons will also illuminate. When recording to an
external disk, the disk indicator will illuminate red.
To finish recording, press the stop button.
SD CARD
+ 12V DC ETHERNET EXT DISK
MENU SET
DISK SD
JOG SCR
CLIP
MENU SET
DISK SD
JOG SCR
HDMI OUT
HDMI IN
CLIP
CLIP
Recording Video 7