Blackmagic Hyperdeck Setup - Blackmagic Design HyperDeck Shuttle HD Manual De Instalación Y Funcionamiento

The teleprompter will acknowledge the font size, color and whether it is set to bold from the file.
Additionally, you can adjust the font size, line spacing, margins or flip the display horizontally or
vertically for when you are projecting the display to beam splitter glass using the monitor menu.
For more information see 'menu settings' earlier in this manual.

Blackmagic HyperDeck Setup

Blackmagic HyperDeck Setup is a software utility you can use to change settings and update
the internal software in your HyperDeck.
To install the software:
1 Download the newest Blackmagic HyperDeck Setup installer from
www.blackmagicdesign.com/support.
2 Run the Blackmagic HyperDeck Setup installer on your computer and follow the
onscreen instructions.
3 After installation is complete, connect your HyperDeck Shuttle HD to the computer
via the USB or Ethernet connector on the rear panel.
4 Launch Blackmagic HyperDeck Setup and follow any onscreen prompt to update
the internal software. If no prompt appears, the internal software is up to date and
there is nothing further you need to do.
Click on the HyperDeck image or the settings icon to open the settings menu.
The home screen will show your HyperDeck Shuttle HD and the name of the unit. This name
is helpful to identify the unit when more than one HyperDeck is connected to your computer
and can be set using the utility's settings menu.
Blackmagic HyperDeck Setup 26