Taking A Measurement - Medline MDS1001 Manual Del Usuario

Taking a Measurement

Please read the previous section on proper placement of
the cuff and proper arm position.
1. Press the (Power Button). The arm cuff will begin to
inflate automatically. The cuff will be quite snug for a
short while, this is normal.
Note: TO END a measurement for any reason, press
the (Power Button) again.
2. After the inflation, the cuff will slowly deflate to take
the measurement. The
measurement is in process.
Note: If the device determined that the initial inflation
pressure was insufficient, it will reinflate at a higher
pressure.
3. The device will completely deflate when the
measurement is finished. The systolic and diastolic
pressure, pulse rate, and pressure gauge indicator will
be displayed.
will flash, indicating that the
Start
Inflating
Deflating
Complete
Date/Time
Pressure
Gauge
Indicator
Pulse Rate
Systolic
Diastolic
17