Memory Function - Medline MDS1001 Manual Del Usuario

Note:
• The device will automatically shut off after 1 minute, or it can be powered off by pressing
the (Power Button).
• If during a measurement the power drops to an insufficient level, the device will end the
measurement and "13" (low battery) will be displayed. Please replace the batteries and
repeat the measurement.
• If the device cannot detect your pulse, it will end the measurement. Please wait a few
minutes, make sure that the cuff is positioned properly, and try again.

Memory Function

Memory Input
When a valid measurement is made, the result (systolic, diastolic, pulse rate, date and time)
will be stored in the memory automatically (as soon as the device is turned off or when
another measurement is initiated). The device can store up to 90 readings, and also compute
the average of the latest 3 readings. When more than 90 readings are stored, the oldest ones
will be replaced.
18