Control Panel Description; Description; Meaning Of The Symbols On The Display - De Dietrich INIDENS 24 Manual De Instalación Y Mantenimiento

4.4

Control panel description

4.4.1

Description

Fig.99 Key descriptions
F1 F2
1
4.4.2

Meaning of the symbols on the display

Tab.98 Symbols on the display
Chimney sweep mode is enabled (forced operation at maximum or minimum output for O
The burner is on.
Display of the system water pressure.
DHW operation is enabled. (*)
Heating mode operation is enabled. (*)
Information menu: View various current values.
User menu: User-level parameters can be configured.
Installer menu: Installer-level parameter can be configured.
Error menu: Errors can be viewed.
Counter menu: Various counters can be viewed.
Important
(*) When the symbol flashes this means that a heat request is in progress.
7804841 - 02 - 20012022
Tab.96
F3 F4
2
BO-0000243
Tab.97
HEATING AND DHW KEYS
HEATING: press the F1 key to set the flow temperature for the
heating installation (heating setpoint 25÷80 °C).
press the F2 key to reduce the temperature;
press the F3 key to increase the temperature;
DOMESTIC HOT WATER: press the F2 key to set the domestic hot
water temperature (heating setpoint 35÷60 °C).
press the F2 key to reduce the temperature;
press the F3 key to increase the temperature;
KEYS
F1 Manual reset/Esc: Return to the previous level.
Decreases the selected value/Scrolling through the menu bar to the
F2
left.
Increases the selected value/Scrolling through the menu bar to the
F3
right.
F4 Enter key: Confirms selection or value.
Chimney sweep function keys
1
Important
Press the F1 and F2 keys simultaneously
Menu keys
2
Important
Press the F3 and F4 keys simultaneously
4 Description of the product
/CO measurement).
2 2
INIDENS
en
159