Choice Of The Location; Important; Data Plate And Boiler Service Label - De Dietrich INIDENS 24 Manual De Instalación Y Mantenimiento

5.4

Choice of the location

5.4.1 Choice of the location
Fig.101 Dimensions

Important

In order to make it easier to install and remove the boiler's flue gas adapter, it is recommended to respect the
dimensions indicated in the figure (expressed in mm) based on the type of adapter used (A, B).
Before installing the boiler, identify the ideal position for its assembly, taking into account:
Standards in force;
the overall dimensions of the appliance;
the position of the combustion gas exhaust outlets and/or the air intake fitting;
the boiler must be installed on a solid wall capable of bearing the weight of the appliance when full of water and fully equipped
with any accessories;
the boiler must be installed on a flat wall (maximum slope permitted 1.5°).
5.4.2

Data plate and boiler service label

Fig.102 Data plate
"Code" "Comm.Code"
"BRAND"
"Product name"
Qn Hi
kW
xx - xx xx - xx
Pn 80/60°C xx - xx xx - xx
kW
Pn 50/30°C xx - xx kW
PMS 3 bar <95 °C
PMW 8 bar
D xx l/min
xxx V ~ xx Hz - xx W - IP xxx
NOx x
Cxx..Cxx..Bxx..Bxx
II
XX
2H - G20 - 20 mbar
X
xxxxx
3P - G31 - 37 mbar
CN1=x CN2=x
s/n: xxxxxxxxx
7804841 - 02 - 20012022
Tab.102 Description of the data plate
kW
kW
kW
0085
7xxxxxx.xx
BO-0000010
"BRAND" Commercial brand
"Code" Product technical code
"Comm. Code" Product commercial code
"Product name" Model name
Qn Hi Nominal input (lower heating value).
Pn Effective rated output (flow 80°C return 60°C).
PMS Maximum heating circuit pressure (bar).
PMW Maximum domestic water circuit pressure (bar).
D Specific flow rate (l/min).
NOx NOx class.
IP Protection rating.
V-Hz-W Power supply and output.
Bxx/Cxx Flue gas exhaust type.
5 Before installation
2,5
BO-0000227
en
INIDENS 163