Franke CM 981 M Manual De Instrucciones página 23

All manuals and user guides at all-guides.com
C - end of cooking
An acoustic alarm sounds for 1 minute at the end of the set time. It can be muted by pressing any button. At the same
time the display shows the message "COOKING END".
The oven automatically switches off the heating, and the inside lamps remain on for about 15 minutes for checking
cooking. However the temperature will remain high for several minutes.
To continue cooking manually, just press the knob C and follow the procedures as described above in the Self Cooking
section.
To end everything, turn knob A to the off position.
It is possible to return to the previous menu screen at any time by selecting "Back" using knob C.
Delayed start of cooking with set duration
Set the cooking duration and the end of cooking time. Assuming the time is 8:00h and cooking is for 30 minutes ending
at 13:00h. After setting the duration and cooking mode as described in the previous section, select "COOKING END"
and confirm by pressing the knob C. Select the cooking end time (13:00h in the example) and confirm.
(After about 13 seconds the oven confirms in any case, even if the user does not confirm.)
The oven is now programmed and in standby mode.
The display shows:
0h30 / 13:00
alternatively the display indicates that their meaning is respectively
DURATION / COOKING END TIME
The set parameters, mode, temperature and times can always be corrected by selecting "Back" using knob C.
Cooking stage:
On reaching the cooking stage the oven behaves as in point B of the previous section.
The cooking duration countdown starts immediately, and not after the required temperature has been reached. This is
because it assumes that the food has already been placed in the oven at the moment of programming. The preheating
time is included in the cooking duration.
22