Mounting And Installation Instructions; General Instructions; Esd Information - Keba KeContact M20 Manual De Configuración

M20
5

Mounting and installation instructions

5.1

General instructions

To protect the KC-M20 from unauthorized access, theft, vandalism and in-
correct configurations, the device must be installed in a lockable environ-
ment (e.g. lockable control cabinet).
WARNING!
Risk of electric shock to persons!
● The Embedded PC must always be installed safely isolated from electric
● The power adapter must not be made user accessible.
5.2

ESD information

Electronic component are generally put at risk by electro-static discharges
(Electro Static Discharge). An electro-static charge can occur during any ac-
tivity involving movement. ESD can occur with any touch.
Most discharges are so low that they are not noticeable. However, they can
nevertheless put unprotected electronic components at risk or even destroy
them. Therefore, any handling with open electronics is only permissible with
the application of effective ESD protection.
When handling open electronics, please follow the following ESD measures:
●
●
●
●
●
●
●
Always keep the devices in their original packaging and only remove the
packaging immediately before installation.
Avoid, for modules which are mounted in an enclosure, direct contact with
any accessible electronic components, such as non-equipped terminals.
Configuration manual V1.01
© KEBA 2022
circuits with hazardous voltage.
Only touch open electronics if this is absolutely necessary.
Wear a conductive ESD wristband.
Use conductive mats.
Establish a conductive connection between device/system, mat, wrist-
band, and grounding connection.
Cotton work clothes are preferred over synthetic fiber materials.
Keep work area free of highly isolating materials (e.g. Styrofoam, plas-
tics, nylon, ...).
Use ESD protection even for defective modules.
Mounting and installation instructions
261